Home Legend HLVP2006 Installationsanleitung

Stöbern Sie online oder laden Sie Installationsanleitung nach Nein Home Legend HLVP2006 herunter. Home Legend HLVP2006 Installation Guide Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 8
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Installation Instructions
Luxury Vinyl Tiles (LVT)
Visit homelegend.com for latest version of installation instructions.
Doc. ID: 185 Rev: 2 Effective: 4/1/2015 Page | 1
Products Included
Approved Grade Levels
Approved Installation Methods
Luxury Vinyl Tiles
3.2 mm products
Above Grade.
On Grade.
Below Grade.
Primary Method: Floating.
Optional Method: Full Spread Glue.
Owner/Installer Responsibility
The owner is advised to be at home during the installation for consultation/direction. The owner and installer should discuss installation and
layout to maximize satisfaction. If this is not possible, consultation should be done prior to installation.
The owner/installer assumes all responsibility for product quality of completed installation.
PERFORM PRE-INSTALL INSPECTION. FOR CLAIMS PURPOSES, YOU ARE ALLOWED TO OPEN UP TO 4 BOXES FOR PRODUCT INSPECTION. DO NOT OPEN
ALL THE BOXES. OPENING ALL THE BOXES CONSTITUTES YOUR ACCEPTANCE OF THE PRODUCT. INSPECT ALL THE PLANKS IN THESE 4 BOXES CAREFULLY.
EXAMINE FLOORING FOR COLOR, FINISH AND QUALITY. IF YOU DISCOVER THAT PRODUCTS ARE DEFECTIVE, OR IF MATERIAL IS QUESTIONABLE, YOU
SHOULD CONTACT THE RETAILER. IF YOU ARE SATISFIED, PROCEED WITH INSTALLATION.
Flooring to be installed in one large area should be purchased at the same time. Product purchased at a later time than the first purchase
may vary beyond your expectations.
This product is manufactured according to strict quality standards. In the event that defects are discovered in the field, the industry
standards permit a defect tolerance not to exceed 5%. Order an additional 5% (10% extra for diagonal installations) for cutting wastage and
plank replacement when the floor is in service.
During installation, inspect the planks continuously. Defects that can be seen from a standing position should be cut off or held out.
Installing defective planks implies acceptance.
If You Need More Information
To assure the warranty is not inadvertently voided, before proceeding with any activity that is not covered in this manual, please contact our
Technical Support Department.
Acclimation and In-service Conditions
Acclimate the flooring in unopened box for 48 hours at ideal room temperature range between 60°F-75°F. Conditions in which the floor was
acclimated should be maintained continuously thereafter. Avoid drastic temperature changes as they may cause the vinyl planks to expand
and contract excessively resulting in gaps. Best practice is to keep in-service temperatures to as close possible to the temperature at time of
acclimation.
Conditions to avoid: Outdoor use, sunrooms, solariums, saunas. We also recommend not to install the product in rooms that are not
temperature controlled. Avoid long-lasting exposure to direct sunlight. Extreme solar exposure, heat, and extreme temperature changes
can damage the flooring.
Date of installation: ______________
Temperature (°F):______
Subfloor Type:______________________
Job Site Condition
Prior to installation, the installer must ensure that at the time of installation, the job site conditions including subfloor/substrate, ambient
temperature and relative humidity, and all impacting variables will not negatively affect floor. Home Legend will decline responsibility for
damages associated with improper installation or poor site conditions.
Storage and Conditions
CAUTION: ASBESTOS IN EXISTING FLOOR
Home Legend product does not contain asbestos. Existing installed resilient flooring and asphaltic adhesive may contain asbestos fillers
or crystalline silica. Do not sand, dry sweep, dry scrape, drill, saw, bead-blast, or mechanically chip or pulverize existing resilient
flooring, backing, lining felt, asphaltic “cutback” adhesive or other adhesive. See “Recommended Work Practices for Removal of
Resilient Floor Coverings” (rfci.com) for detailed information and instructions on removing all resilient covering structures.
Seitenansicht 0
1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - Luxury Vinyl Tiles (LVT)

Installation Instructions Luxury Vinyl Tiles (LVT) Visit homelegend.com for latest version of installation instructions. Doc. ID: 185 Rev: 2 Effec

Seite 2

Doc. ID: 185 Rev: 2 Effective: 4/1/2015 Page | 2 Do not store flooring in uncontrolled environmental conditions. For example, garages and exteri

Seite 3

Doc. ID: 185 Rev: 2 Effective: 4/1/2015 Page | 3 tongued and grooved. Do not cut in expansion space on joined tongue and groove of panels. Partic

Seite 4 - Floating Installation

Doc. ID: 185 Rev: 2 Effective: 4/1/2015 Page | 4 3 42 • Using a shorter piece at undercut door jams will help when fitting flooring in pla

Seite 5

Doc. ID: 185 Rev: 2 Effective: 4/1/2015 Page | 5 Step 6 • Stagger the end joints between rows at a minimum 12 inches. • If you can, use the cut

Seite 6 - Glue Down Installation

Doc. ID: 185 Rev: 2 Effective: 4/1/2015 Page | 6 Glue Down Installation Installation Overview • The main difference between floating and glue

Seite 7 - CARE AND MAINTENANCE GUIDE

Doc. ID: 185 Rev: 2 Effective: 4/1/2015 Page | 7 CARE AND MAINTENANCE GUIDE Luxury Vinyl Tiles (LVT) DAILY MAINTENANCE: 1. Sweep, dust mop or

Seite 8

Doc. ID: 185 Rev: 2 Effective: 4/1/2015 Page | 8 Warranty This flooring product comes with a Home Legend Limited Wear Warranty. The warranty app

Kommentare zu diesen Handbüchern

Keine Kommentare